Delving deeper

Going where this man has not gone before! I'm having the valves pressure tested and will also get the cylinders honed as there is slight scoring. To do the cylinders I will take the crankshaft out, It means I'll have to remove everything. 

Took the clutch and flywheel off.

and then the end seal mounting. 

Front timing assembly removed and oil filter

Crankshaft yokes and bearings market up

Have to make sure I can put things back together again!

Carefully removed each yoke and bearing in turn.

Laid out in order

Everything removed from the block

Ready for honing - back hopefully next week